APC Trade-UPS is a 1-phase UPS program that offers new and existing customers the ability to trade in older battery backup units for the most up-to-date 1-phase power protection models at discounted prices.
Select UPS(s) for your purchase. Continue to add units until you meet your minimum Trade-UPS requirement of
0 VA
You have reached your limit in available VA. If you wish to purchase additional products you must either enter additional trade-ins, or remove products from you cart.
You have met your minimum purchase requirement. Choose additional UPS(s), or continue to Step 3, "Choose Accessories".
APC Rack PDU, 2G, switched, 0U, 30A, 100V to 120V, 24 NEMA 5-20R sockets
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Includes
:
Installation guide
,
Rack mounting brackets
,
Safety guide
,
Serial configuration cable
Vertical Mounting Capabilities
Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures.
NetShelter Switched Rack PDUs Features & Benefits
Gigabit Ethernet Connectivity
9000 series PDUs provide Gigabit Ethernet to enhance and standardize network connectivity across all assets in the data center. All other models provide 10/100 ethernet connectivity.
Enhanced Cybersecurity
9000 series PDUs include APC Network Management card with security features including secured interfaces and a modified password policy providing peace of mind.
Network Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web and SNMP. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time.
Multi-tier user access
Supports up to four access levels - Administrator, Device User, Read-Only User and Network-only User - with user name and password requirements.
EcoStruxure IT Ready
Seamless integration of one or many PDUs including alerts and control with EcoStruxure IT. Allows IT and data center professionals to monitor and manage all of their critical IT infrastructure on-premise, in the cloud, and at the edge from anywhere.
Alarm Thresholds
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Alarm Thresholds
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Outlet Level Grouping
Outlet power sequencing can be configured to group any combination of outlets to power up or down together providing flexibility.
Network Port Sharing
Connect and manage multiple PDUs from one IP address to simplify and speed deployment while saving the cost required in having a dedicated network connection for each PDU. Manage up to 32 PDUs with 9000 series and up to 4 PDUs with 8000 series.
1% Metering Accuracy
Providing the same level of accuracy as a utility company meter by adhering to IEC 62053-21 class 1, 1% metering accuracy provides peace of mind to use these PDUs to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Available on 9000 series PDUs.
C13/C15 and C19/C21 Hybrid Outlets
Available on select 9000 series PDUs only, Industry 1st hybrid outlets allow 60C operating temperature at full load, are fully compatible with standard C14 and C20 power cords, and are future proofed for implementation of higher temperature rated devices requiring C16 and C21 power cords.
60C Operating Temperature
All 8000 and 9000 series PDUs now provide the ability to operate in a maximum ambient air temperature of 60C (140F) at full load ensuring reliability and availability even in today's high density deployments. Other models allow up to 45C (113F).
High Retention Outlets
With no special power cords required, high retention outlets provide up to twice the holding force to reduce risk of accidental disconnect on 9000 series PDUs.
Field-replaceable NMC
Integrated Network Management Card/Display Module can be replaced in the field to minimize downtime disruption in the unlikely event of a failure.
Hydraulic Magnetic Circuit Breakers
Provide increased availability by maintaining trip current over a wide temperature range.
Flash Upgradeable
Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Rack-Mountable
Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
Wide range of input and output connections
Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 17.3kW using a single branch whip.
Single input power source
Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Product Distribution
Product Distribution
Canada
,
Chile
,
Colombia
,
Japan
,
Turkey
,
Taiwan
,
United States
Print Technical Specification
Output
Nominal Output Voltage
100V
,
120V
Overload Protection
Yes
Output Connections
(24)
NEMA 5-20R
(Battery Backup)
Input
Nominal Input Voltage
100V
,
120V
Input frequency
50/60 Hz
Input Connections
NEMA L5-30P
Cord Length
9.84ft
(
3meters
)
Acceptable Input Voltage
100 - 120VAC
Number of Power Cords
1
Load Capacity
2880VA
Maximum Input Current
30A
Regulatory Derated Input Current (North America)
24A
Physical
Maximum Height
70.51inches
(
1791MM
,
179.1CM
)
Maximum Width
2.17inches
(
55MM
,
5.5CM
)
Maximum Depth
1.81inches
(
46MM
,
4.6CM
)
Net Weight
17.31lbs.
(
7.85KG
)
Shipping weight
21.3lbs.
(
9.66KG
)
Shipping Height
78.98inches
(
2006MM
,
200.6CM
)
Shipping Width
4.26inches
(
108MM
,
10.83CM
)
Shipping Depth
6.48inches
(
165MM
,
16.47CM
)
Color
Black
Environmental
Operating Temperature
23 - 140 °F
(
-5 - 60 °C
)
Operating Relative Humidity
5 - 95 %
Operating Elevation
0 - 10000ft
(
0 - 3048meters
)
Storage Temperature
-25 - 65 °C
Storage Relative Humidity
5 - 95 %
Storage Elevation
0 - 50000ft
(
0 - 15240meters
)
Conformance
Approvals
cUL listed, FCC part 15 class A, ICES-003, PSE, UL 60950-1, UL listed
Release Notes for AP88XX Metered Rack PDUs and AP89xx/AP86xx Switched Rack PDUs for Application Module v6.4.0, APC OS (AOS) v6.4.0, and the APC PowerNet MIB v415
Chart that specifies the APC Modular Power Distribution Units that support the installation of APC 208V & 415V Power Distribution Modules and specifies compatible APC Rack PDUs for each PDM.
APC Metered by Outlet Rack Power Distribution Units (PDUs) provide individual outlet power metering to enable energy optimization and circuit protection. Current metering provides real-time remote monitoring of connected loads. Metered by Outlet Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered by Outlet Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered by Outlet Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
This Temperature & Humidity Sensor is a Universal sensor that monitors temperature and humidity in your Data Center or Network Closet. IT has an RJ-45 connector. The cord length is 3.9m.
The APC Trade-UPS program* is a cost-effective way to upgrade your existing units and protect your latest investment. Trade in any UPS, regardless of its manufacturer or its working condition, for the latest APC UPS technology and receive up to a 25% discount on your new purchase.*** The Trade-UPS program is currently available in the United States, Canada, Ireland, United Kingdom, France, Spain, Portugal, Austria, Belgium, Czech Republic, Germany, Denmark, Finland, Italy, Luxembourg, Netherlands, Norway, Poland, and Sweden.** This program is applicable for original equipment owners only.
Up to a 25% discount on eligible APC accessories
As a benefit to our customers, now you can also buy eligible additional APC accessories at a significant discount, if purchased along with your Trade-UPS.
Upgrade to four times the VA of your current UPS capacity
Trade in up to 4X the VA of your current UPS capacity or trade in two UPSs for one larger unit.
Up to a 3 year factory warranty on new units
Free return shipping of existing units
Order new units today and receive free return shipping of your retired units back to APC. APC will also pay to have larger UPS units picked up and returned.* *Applicable only to defined easy access areas
Proper ecological disposal of returned UPS units and batteries for free
All old units, including hazardous UPS batteries, returned to APC will then be properly and ecologically disposed of according to Environmental Protection Agency standards (a $5 to $500 value depending on the UPS).
trade-ups program rules
Trade-UPS Rules
To participate in the Trade-UPS program, the customer agrees to the following rules
Trading In a Single UPS: Customers can trade in a UPS, for a new UPS, up to four times the VA rating of the UPS being traded in. (For example, if an customer trades in a 750VA UPS, they can purchase up to a 3000VA UPS under the this program). IMPORTANT: The VA rating of the UPS to be purchased must equal or exceed the amount of the UPS traded in.
Trading In Multiple UPSs: Customers can trade in multiple UPSs for larger UPSs. The VA of the multiple units can be combined, then doubled, to get a maximum VA the customer is eligible to trade up to. Customer cannot trade in UPSs for any single or multiple UPSs of lesser value (VA) than the combined VA of all units traded in.
At time of Trade-UPS purchase, customer can purchase a maximum of five additional items at “Trade-UPS/Cross-Sell Pricing”. Additional items can only include Surge products, or UPS accessories relative to the application level of the UPS(s) that are being purchased. Trade-UPS/Cross-Sell purchases are limited to the time of initial Trade-UPS purchase, any additional items purchased after the initial Trade-UPS purchase will not be eligible for the Trade-UPS/Cross-Sell discount.
In the event the UPS being traded in is not returned to APC within 30 days of receipt of the new UPS, the customer shall be charged for the amount of the Trade-UPS/Cross-Sell discount. The dollar value of the Trade-UPS/Cross-Sell discount shall be calculated as the difference between APC Estimated Resale Price (ERP) at time of purchase, and the Trade-UPS/Cross-Sell Price. Customer must supply credit card at time of initial Trade-UPS purchase. This credit card will be debited for the amount of the discount if unit being traded in, is not sent to APC within 30 days.
APC RESERVES THE RIGHT TO REFUSE ANY TRADEUPS ORDER.
