{}

Our Brands

Welcome to the Schneider Electric Website

Welcome to our website.
Show more
Popular Video FAQsPopular Videos
Show more
Learn more through our Generic Knowledge FAQsGeneral Knowledge
What is the difference between ONAN and KNAN transformer in Oil Distribution Transformers?

The designation of cooling types of the oil distribution transformers depend on the fire point of the oil being used in the transformer. Mineral oils are symbolized with "O" since their fire point is below 300°C. Non-mineral oils such as silicone oil, Synthetic Ester (which is also known...

How to choose the correct Residual Current Circuit Breaker (RCCB) for my application?

Specification Requirements For us to identify the correct Residual Current Circuit Breaker (RCCB), we will be needing the following information: -No of poles: -Earth Leakage Sensitivity: -Ampere Rating: -Operating Voltage: -Type: (if unsure of RCCB Type, see chart below) Once we have these...

ATV320 showing tnF when turning on the drive

Issue: Drive is showing tnF (autotune fault) when the drive is turned on Product Line: ATV320 Environment: ATV320 all series Cause: ATV320 is showing tnF at the moment to turn on the drive. Resolution: Confirm if motor is connected to the drive. If motor is connected, there should be a problem...

PowerLogic PM5000 Series (PM5100, PM5300, PM5500) Modbus Register List

Issue Register list for Modbus communication Product Line PM5110, PM5330, PM5340, PM5560, and PM5563 Environment Power Meter Communications Modbus Register List Cause PM5000 series register list is needed for Modbus communication Resolution See the attached documents for Register List.

Does Schneider Electric have Bi-directional Power meter?

Yes, our PM2000, PM5000, PM8000 and ION9000 series meters have bi-directional energy measurement feature i.e it will give energy import/delivered and energy export/received. Positive real power P(+) flows from the power source to the load. Negative real power P(-) flows from the load to the power...

How do you produce a hash value for a file?

Issue: My company wants to conform to NERC requirements. How do you produce a hash value for a file? Product Line: All Scheider devices and software Environment: Windows 7, 10 Resolution: Navigate to the folder where the files you want to generate a hash algorithm for are located. 1. Open a command...

On an ATV212, can the analog input be programmed for 0-10V to control 30-60Hz?

Issue: Programming analog input for 0-10V to control 30-60 Hz on an ATV212 Drive. Product Line: Altivar 212 Environment: All Cause: Wants 0-10V to equal 30-60Hz Resolution: Yes, this is accomplished by adjusting the scaling of the applicable analog input so that the drive knows that 0%=30Hz. If...

What is Modbus and How does it work?

What is Modbus? Modbus is a serial communication protocol developed by Modicon published by Modicon® in 1979 for use with its programmable logic controllers (PLCs). In simple terms, it is a method used for transmitting information over serial lines between electronic devices. The device...

Show more
Popular Video FAQsPopular Videos
Show more
Learn more through our Generic Knowledge FAQsGeneral Knowledge
Apa alternatif replacement battery UPS SURT15KRMXLI jika APCRBC140 tidak ready stock?

Apa alternatif replacement battery UPS SURT15KRMXLI jika APCRBC140 tidak ready stock? ======================================================================= Untuk alternatifnya bisa menggunakan battery pack type SURT192XLBP sebanyak 2 sets, karena didalam 1 set SURT192XLBP terdapat 2 sets battery...

What is Power Factor Correction (PFC) - Does it help conserve energy?

Issue: What is Power Factor Correction (PFC) - Does it help conserve energy? Answer: Power Factor Correction (PFC) doesn't directly reduce the overall electric consumption of a device or system, but it does play a role in optimizing the efficiency of electrical systems, which can indirectly lead to...

What is an Electrical "Ground Loop" - How does it affect my equipment?

Issue: What is an electrical "ground loop" and how does it affect my equipment? Environment: Ground loops can occur in any situation where multiple electrical devices are interconnected, especially when those devices are powered from different sources or located in different places with varying...

What is the selection criterion of Circuit Breakers for the Capacitor bank application.

The selection should be done after derating the Circuit Breaker taking into consideration voltage variation and capacitors tolerances that could increase nominal current up to 1.5In. The Derating factor of 1.5In Where In = Q/ ( Square root of 3 ) Un Q = Capacitor Power Un = Nominal Voltage...

move-arrow-top
Your browser is out of date and has known security issues.

It also may not display all features of this website or other websites.

Please upgrade your browser to access all of the features of this website.

Latest version for Google Chrome, Mozilla Firefox or Microsoft Edgeis recommended for optimal functionality.
Your browser is out of date and has known security issues.

It also may not display all features of this website or other websites.

Please upgrade your browser to access all of the features of this website.

Latest version for Google Chrome, Mozilla Firefox or Microsoft Edgeis recommended for optimal functionality.