Issue:
Equipment with different mounting depths needs to be mounted into a cabinet.
Product Line:
NetShelter SX
Environment:
All versions and serial ranges.
Cause:
Need to know if the recessed rail kits must be used between the original full height rails, or if full height replacement rails will work.
Resolution:
Always use recessed rail kits to install equipment of differing depths.
The original full height mounting rails should be used for the front and rear rails.
Any rails installed between the original full height rails should be the recessed rail kits.
Equipment with different mounting depths needs to be mounted into a cabinet.
Product Line:
NetShelter SX
Environment:
All versions and serial ranges.
Cause:
Need to know if the recessed rail kits must be used between the original full height rails, or if full height replacement rails will work.
Resolution:
Always use recessed rail kits to install equipment of differing depths.
The original full height mounting rails should be used for the front and rear rails.
Any rails installed between the original full height rails should be the recessed rail kits.
Publié pour:Schneider Electric Belgium
Issue:
Equipment with different mounting depths needs to be mounted into a cabinet.
Product Line:
NetShelter SX
Environment:
All versions and serial ranges.
Cause:
Need to know if the recessed rail kits must be used between the original full height rails, or if full height replacement rails will work.
Resolution:
Always use recessed rail kits to install equipment of differing depths.
The original full height mounting rails should be used for the front and rear rails.
Any rails installed between the original full height rails should be the recessed rail kits.
Equipment with different mounting depths needs to be mounted into a cabinet.
Product Line:
NetShelter SX
Environment:
All versions and serial ranges.
Cause:
Need to know if the recessed rail kits must be used between the original full height rails, or if full height replacement rails will work.
Resolution:
Always use recessed rail kits to install equipment of differing depths.
The original full height mounting rails should be used for the front and rear rails.
Any rails installed between the original full height rails should be the recessed rail kits.
Publié pour:Schneider Electric Belgium
